FRONT DOOR OPENING TRIM WEATHERSTRIP INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. B005L8NC01
      *a Alignment Mark
      B005NIZ Flange Position

      Align the alignment mark on the front door opening trim weatherstrip with the flange on the vehicle body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip.

      Alignment Mark
      Location Color
      for LH Side Purple
      for RH Side Yellow

      Note

      After installation, check that the corners fit correctly.

  2. INSTALL COWL SIDE TRIM BOARD


    1. B005NBRC01
      B005OOA Install in this Direction

      Engage the clip and claw as shown in the illustration.

    2. Install the cowl side trim board with the clip.

  3. INSTALL INSTRUMENT PANEL GARNISH

    Click here

  4. INSTALL ROOF HEADLINING ASSEMBLY

    Click here