POWER BACK DOOR CONTROL SWITCH REMOVAL

PROCEDURE

1. REMOVE INSTRUMENT PANEL GARNISH

   Click here

2. REMOVE FRONT DOOR SCUFF PLATE

   Click here

3. REMOVE COWL SIDE TRIM BOARD

   Click here

4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

   Click here

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

7. REMOVE DOOR CONTROL SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)

   
   

   1. 

      Remove in this Direction

      Using a screwdriver, disengage the 4 claws and remove the door control switch (integration control and panel assembly) as shown in the illustration.