BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check the operation of the opener switch.


      1. A01RAZKC75
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 3 Back door opener switch not pushed 10 kΩ or higher
        2 - 3 Back door opener switch pushed Below 1 Ω

        If the result is not as specified, replace the back door opener switch assembly.

    2. Check the operation of the lock switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Back door lock switch not pushed 10 kΩ or higher
        1 - 2 Back door lock switch pushed Below 1 Ω

        If the result is not as specified, replace the back door opener switch assembly.