LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Back Door* / Data List.


      • *: w/ Power Back Door System

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Engine switch on (ACC) signal OFF or ON

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      IG SW Engine switch on (IG) signal OFF or ON

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch assembly RH signal OFF or ON

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly LH signal OFF or ON

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch signal OFF or ON

      ON: Back door open

      OFF: Back door closed

      		 For vehicles with power back door system, this item is not related to back door condition.
      FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly RH signal OFF or ON

      ON: Front oor RH open

      OFF: Front oor RH closed

      		 -
      FL Door Lock Pos Front oor LH unlock detection switch signal LOCK or UNLOCK

      LOCK: Front oor LH locked

      UNLOCK: Front oor LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON

      ON: Front oor LH open

      OFF: Front oor LH closed

      		 -
      Dome Light DOOR SW Door switch signal OFF or ON

      ON: Door switch pressed

      OFF: Door switch not pressed

      		 -
      Dome Light SW Front dome light switch signal OFF or ON

      ON: Front dome light switch ON

      OFF: Front dome light switch OFF

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch signal OFF or ON

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch signal OFF or ON

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Interior Light Control Operation of the illuminated entry system OFF or ON Customized value is displayed Displayed only when All Data is selected.
      I/L ON W/Door Key Unlock Function that lights up the interior lights when the doors are unlocked OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Lighting Time Lighting time of the delay control function (illuminated entry system) 15s, 7.5s or 30s Customized value is displayed Displayed only when All Data is selected.
      Room Light when Aprchd Function that lights up the interior lights when a key enters any actuation area OFF or ON Customized value is displayed Displayed only when All Data is selected.
      I/L when ACC OFF Function that lights up the interior lights when the engine switch is turned from on (ACC or IG) to off OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Light Control Function that lights up the ambient lights (while driving) OFF or ON Customized value is displayed Displayed only when All Data is selected.
      Interior Illumination Light Function that lights up the ambient lights (always) OFF or ON Customized value is displayed Displayed only when All Data is selected.

      Body Electrical > Back Door > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Courtesy SW Back door courtesy switch signal* OFF or ON

      ON: Back door open

      OFF: Back door closed

      		 -

      • *: w/ Power Back Door System

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / (desired system) / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Illuminated Entry System Turns on the lights that are controlled by the illuminated entry system*1 ON or OFF Perform the Active Test with door switch in the map light assembly turned on.
      Fr Foot Light Footwell light and instrument panel box light ON or OFF -
      Relay for Interior Light Auto Cut Function DOME CUT relay ON or OFF

      • ON: DOME CUT relay off (interior lights turn off)

      • OFF: DOME CUT relay on (interior lights turn on)
      Interior Illumination Light1 Instrument panel ambient illumination light ON or OFF

      Preconditions for using the Active Test to check dimmer controlled illumination:


      • Engine switch on.

      • Shift lever is in any position other than P.
      Interior Illumination Light2 Door ambient illumination light ON or OFF

      Preconditions for using the Active Test to check dimmer controlled illumination:


      • Engine switch on.

      • Shift lever is in any position other than P.

      *1: Refer to Description for the lights that are controlled by the illuminated entry system.

      Click here


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Power/Engine SW Light Engine switch illumination OFF or ON

      When performing this Active Test, make sure the following condition is met:

      The engine switch illumination is off (15 seconds or more have elapsed since it turned from on to off) and the engine switch is on (ACC) or on (IG), or the engine is running.