ELECTRICAL KEY OSCILLATOR(for Center Floor) REMOVAL

PROCEDURE


  1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. B005O28C01
      B005OOA Remove in this Direction

      Disconnect the connector.

    2. Disengage the clamp to remove the No. 2 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.