ELECTRICAL KEY OSCILLATOR(for Front Floor) INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. B005Q2YC01
      B005OOA Install in this Direction

      Engage the clamp to install the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when installing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL NO. 1 CONSOLE BOX DUCT


    1. B005PCN

      Install the No. 1 console box duct with the clip.

  3. INSTALL SHIFT AND SELECT LEVER SUPPORT


    1. B005MISN01

      Install the shift and select lever support with the bolt (A) and 2 bolts (B).

      Torque:
      Bolt (A)
      22 N*m  { 224 kgf*cm, 16 ft.*lbf }

  4. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET


    1. Install the No. 3 console box mounting bracket with the 2 nuts.

  5. INSTALL TELEMATICS TRANSCEIVER WITH BRACKET (w/ Telematics Transceiver for G-BOOK)

    Click here

  6. INSTALL TELEMATICS TRANSCEIVER (w/ Telematics Transceiver except G-BOOK)

    Click here

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  8. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

    for U661E Automatic Transmission / Transaxle:

    Click here

    for U661F Automatic Transmission / Transaxle:

    Click here

    for U881E Automatic Transmission / Transaxle:

    Click here

    for U881F Automatic Transmission / Transaxle:

    Click here