ELECTRICAL KEY OSCILLATOR(for Front Floor) REMOVAL

PROCEDURE


  1. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

    for U661E Automatic Transmission / Transaxle:

    Click here

    for U661F Automatic Transmission / Transaxle:

    Click here

    for U881E Automatic Transmission / Transaxle:

    Click here

    for U881F Automatic Transmission / Transaxle:

    Click here

  2. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  3. REMOVE TELEMATICS TRANSCEIVER WITH BRACKET (w/ Telematics Transceiver)

    Click here

  4. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET


    1. B005M89

      Remove the 2 nuts and No. 3 console box mounting bracket.

  5. REMOVE SHIFT AND SELECT LEVER SUPPORT


    1. B005MIS

      Remove the 3 bolts and shift and select lever support.

  6. REMOVE NO. 1 CONSOLE BOX DUCT


    1. B005PCN

      Remove the clip.

    2. Remove the No. 1 console box duct.

  7. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. B005Q62C01
      B005OOA Remove in this Direction

      Disconnect the connector.

    2. Disengage the clamp to remove the No. 1 indoor electrical key antenna assembly as shown in the illustration.

      Note

      Be careful when removing the No. 1 indoor electrical key antenna assembly. If the No. 1 indoor electrical key antenna assembly is dropped, replace it with a new one.