ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) REMOVAL

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY

   Click here

2. REMOVE DECK BOARD ASSEMBLY

   Click here

3. REMOVE REAR NO. 3 FLOOR BOARD

   Click here

4. REMOVE SPARE WHEEL COVER (for Compact Spare Tire)

   Click here

5. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

6. REMOVE REAR FLOOR CARPET (w/o Spare Tire)

   Click here

7. REMOVE REAR NO. 4 FLOOR BOARD (except Full Size Spare Tire)

   Click here

8. REMOVE REAR NO. 4 FLOOR BOARD (for Full Size Spare Tire)

   Click here

9. REMOVE FRONT DECK FLOOR BOX (w/ Spare Tire)

   Click here

10. REMOVE DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

11. REMOVE DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

12. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    
    

    1. 

       Remove in this Direction

       Disconnect the connector.

    2. Disengage the clamp to remove the No. 3 indoor electrical key antenna assembly as shown in the illustration.

       Note

       Be careful when removing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.