THEFT DETERRENT SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Back Door* / Data List.


      • *: w/ Power Back Door System

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      ACC SW Engine switch ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      IG SW Engine switch ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off or on (ACC)

      		 -
      RR Door Courtesy SW Rear door courtesy light switch assembly (for RH) ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch assembly (for LH) ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 For vehicles with power back door system, this item is not related to back door condition.
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch assembly (for RH) ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch assembly (for LH) ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      Hood Courtesy SW Engine hood courtesy switch ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear door RH unlock detection switch ON or OFF

      ON: Rear door RH unlocked

      OFF: Rear door RH locked

      		 -
      RL-Door Lock Pos SW Rear door LH unlock detection switch ON or OFF

      ON: Rear door LH unlocked

      OFF: Rear door LH locked

      		 -
      Intrusion Sens OFF SW Intrusion sensor cancel switch*1 ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Glass Break Sensor Detection Glass breakage sensor breakage detection*1 ON or OFF

      ON: Glass breakage sensor breakage detected

      OFF: Glass breakage sensor breakage not detected

      		 -
      Intrusion Sensor Detection status of the intrusion sensor (theft warning ultrasonic sensor)*1 ON or OFF

      ON: Intrusion detected

      OFF: Intrusion not detected

      		 -
      Tilt Sensor Detection status of the tilt sensor*2 ON or OFF

      ON: Change in pitch angle detected

      OFF: Change in pitch angle not detected

      		 -
      Intrusion Sen Conn Intrusion sensor (theft warning ultrasonic sensor) connection*1 ON or OFF

      ON: Intrusion sensor connected

      OFF: Intrusion sensor not connected

      		 -
      Tilt Sensor Connect Tilt sensor connection*2 ON or OFF

      ON: Tilt sensor connected

      OFF: Tilt sensor not connected

      		 -
      Sealed Glas Brak Sen Glass breakage sensor connection*1 With or Without

      With: Glass breakage sensor connected

      Without: Glass breakage sensor not connected

      		 -
      Intrusion Sensor Sound Detect Sound detection status of the intrusion sensor (theft warning ultrasonic sensor)*1*6 ON or OFF

      ON: Sound detected

      OFF: Sound not detected

      		 -
      Panic Function Setting of customize setting "Panic Function"*4 ON or OFF Customize setting displayed -
      Intrusion Win Opened Setting of customize setting "Intrusion Win Opened"*1 ON or OFF Customize setting displayed -
      Security control with mechanism key Setting of customize setting "Security control with mechanism key"*5 ON or OFF Customize setting displayed -
      Intrusion Sensor Sound Detection Function Setting of the customized item "Intrusion Sensor Sound Detection Function"*1*6 ON or OFF Customize setting displayed -
      Intrusion Sensor Sensitivity Level Setting of the customized item "Intrusion Sensor Sensitivity Level"*1*6 Low or Normal Customize setting displayed -
      Communication Theft Deterrent Connection status between theft deterrent ECU and main body ECU (multiplex network body ECU)*3 STOP or OK

      STOP: Communication stopped

      OK: Normal communication

      		 Not applicable
      The Number of DTC Number of DTCs 0 to 255 Number of DTCs will be displayed -

      • *1: w/ Intrusion Sensor Cancel Switch

      • *2: w/ Tilt Sensor

      • *3: Although the item is displayed on the GTS, it is not applicable to this vehicle.

      • *4: w/ Panic Switch

      • *5: Vehicles displaying the item "Security control with mechanism key" on the GTS

      • *6: w/o Door Ajar Warning Buzzer Function


      Body Electrical > Back Door > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Courtesy SW Back door courtesy switch signal* OFF or ON

      OFF: Back door closed

      ON: Back door open

      		 -

      • *: w/ Power Back Door System

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Main Body > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Security Horn2 Theft warning siren assembly*2 OFF/ON -
      Vehicle Horn Vehicle horns OFF/ON -
      Security Horn Security horn assembly*1 OFF/ON -
      Power For Intrusion Sensor Intrusion sensor (theft warning ultrasonic sensor) power supply*3 OFF/ON -
      Power For Tilt Sensor Tilt sensor power supply*4 OFF/ON -

      • *1: w/ Security Horn Assembly

      • *2: w/o Security Horn Assembly

      • *3: w/ Intrusion Sensor Cancel Switch

      • *4: w/ Tilt Sensor


      Body Electrical > Entry&Start > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Immobiliser Indicator Security indicator OFF/ON -