DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01REM1C12
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      12 (L) - 5 (GND) Lock switch pushed Below 200 Ω
      12 (L) - 5 (GND) Lock switch not pushed 1 MΩ or higher
      7 (UL) - 5 (GND) Unlock switch not pushed 1 MΩ or higher
      7 (UL) - 5 (GND) Unlock switch pushed Below 200 Ω

      If the result is not as specified, replace the power window regulator switch assembly.