| DTC Code | DTC Name |
|---|---|
| C2A6D | Front Camera Response Malfunction |
DESCRIPTION
During self diagnosis of the parking assist ECU, the parking assist ECU sends display mode ID signals to the front television camera assembly. This DTC is stored when the output of the front television camera assembly does not match the expected output.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C2A6D | Front Camera Response Malfunction | Abnormal response from the front television camera assembly |
|
CAUTION / NOTICE / HINT
Note
When "!" mark is displayed on the multi-display assembly*1 or accessory meter assembly*2 after the cable is disconnected from the negative (-) battery terminal, correct the steering angle neutral point.
*1: for 8 Inch Display
*2: for 12.3 Inch Display
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
PROCEDURE
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| OK |
|---|
| DTC C2A6D is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
REPLACE FRONT TELEVISION CAMERA ASSEMBLY
Replace the front television camera assembly with a new or normally functioning one.
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| OK |
|---|
| DTC C2A6D is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
END (FRONT TELEVISION CAMERA ASSEMBLY IS DEFECTIVE) |
| NG |
|
REPLACE PARKING ASSIST ECU for LHD: Click here |