TELEVISION CAMERA(for Rear) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly Rear television camera assembly optical axis (Back camera position setting) Parking assist monitor system (w/ Parallel parking assist function)

Click here for Initialization

Click here for Calibration

  • Parking assist monitor system initialization

  • Rear television camera assembly optical axis (Back camera position setting)

 Parking assist monitor system (w/o Parallel parking assist function)

Click here for Initialization

Click here for Calibration
Rear television camera view adjustment Panoramic view monitor system

Click here for Initialization

Click here for Calibration

PROCEDURE


  1. PRECAUTION


    1. w/ Parking Assist Monitor System:


    2. w/ Panoramic View Monitor System:

      Click here

  2. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  3. REMOVE REAR TELEVISION CAMERA ASSEMBLY


    1. B005LVK

      Disconnect the connector.

    2. B005M6EC01
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the claw in the direction indicated by the arrow (1).

    3. Pull the rear television camera assembly in the direction indicated by the arrow (2) to disengage the guide and remove the rear television camera assembly.