CLEARANCE WARNING ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

   
   

   1. 

      Install in this Direction

      Engage the 2 claws to install the clearance warning ECU assembly as shown in the illustration.

2. INSTALL ECU INTEGRATION BOX RH

   
   

   1. Install the ECU integration box RH with the bolt and 2 nuts.

      Torque:

      Nut

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Engage the clamp.

   3. Connect each connector.

3. INSTALL PARKING ASSIST ECU (w/ Panoramic View Monitor System)

   Click here

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. INSTALL INSTRUMENT PANEL GARNISH RH

   Click here

9. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

11. PERFORM CALIBRATION (w/o Intelligent Clearance Sonar System)

    Click here

12. PERFORM CALIBRATION (w/ Intelligent Clearance Sonar System)

    Click here

    SST

    09989-00020