CLEARANCE WARNING ECU(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL CLEARANCE WARNING ECU ASSEMBLY


    1. B005MRDC01
      B005OOA Install in this Direction

      Engage the 2 claws to install the clearance warning ECU assembly as shown in the illustration.

  2. INSTALL ECU INTEGRATION BOX RH


    1. Install the ECU integration box RH with the bolt and 2 nuts.

      Torque:
      Nut
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Engage the clamp.

    3. Connect each connector.

  3. INSTALL PARKING ASSIST ECU (w/ Panoramic View Monitor System)

    Click here

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  7. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  8. INSTALL INSTRUMENT PANEL GARNISH RH

    Click here

  9. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  11. PERFORM LEXUS PARKING ASSIST-SENSOR SYSTEM CALIBRATION

    Click here