| DTC Code | DTC Name |
|---|---|
| B2345 | Motor Control Relay Stuck ON |
DESCRIPTION
This DTC will be stored if the operation of the sliding roof or roof sunshade is suspended and a pulse input of 10 Hz or more is detected when the motor relay is off.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2345 | Motor Control Relay Stuck ON | Position failure (When the sliding roof ECU (sliding roof drive gear assembly) enters fail-safe mode due to a problem with the gear position) | Sliding roof ECU (Sliding roof drive gear assembly) |
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2345 | Motor Control Relay Stuck ON | Position failure (When the roof sunshade ECU (sliding roof drive gear assembly) enters fail-safe mode due to a problem with the gear position) | Roof sunshade ECU (Sliding roof drive gear assembly) |
CAUTION / NOTICE / HINT
Note
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
DTC B2345 is stored in the sliding roof ECU (sliding roof drive gear assembly) and roof sunshade ECU (sliding roof drive gear assembly).
PROCEDURE
CHECK FOR DTC
Clear the DTCs.
Check for DTCs.
| OK |
|---|
| DTC B2345 is not output. |
| Result | |||
|---|---|---|---|
|
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CHECK DTC OUTPUT
Check the parts from which this DTC has been output.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) Click here |
| B |
|
REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) Click here |