DESCRIPTION
According to the map light assembly operation, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) operates its built-in motor. Using the map light assembly, if the sliding roof glass or roof sunshade can be operated normally when 45 seconds or more have elapsed since the engine switch was turned off, the key-off operation function may be abnormal.
CAUTION / NOTICE / HINT
Note
If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) must be initialized.
The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.
If the main body ECU (multiplex network body ECU) is replaced, refer to Service Bulletin.
The vehicle battery supplies power to the main body ECU (multiplex network body ECU) via the door control battery. Therefore, before proceeding with troubleshooting, perform an on-vehicle inspection and confirm that the main body ECU (multiplex network body ECU) power source circuit is normal.*
*: w/o Canister Pump Module with Door Ajar Warning Function
PROCEDURE
CHECK POWER WINDOW CONTROL SYSTEM
Check if the key-off operation function of the power window control system operates normally.
| OK |
|---|
| The key-off operation function of the power window control system operates normally. |
| Result | |||
|---|---|---|---|
|
| NG |
|
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here |
| OK |
|
CHECK KEY-OFF OPERATION FUNCTION
Check the key-off operation function.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| A |
|
REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) Click here |
| B |
|
REPLACE ROOF SUNSHADE ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) Click here |