WINDSHIELD DEICER SYSTEM TERMINALS OF ECU


  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

    A01VWJ1C03
    *A w/o Seat Heater System *B w/ Seat Heater System

    1. Disconnect the J43 air conditioning amplifier assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      J43-2 (IG+) - J43-4 (GND) GR - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
      J43-2 (IG+) - J43-4 (GND) GR - W-B Power source (IG) Engine switch off Below 1 V
      J43-1 (B) - J43-4 (GND) R - W-B Battery power supply Always 11 to 14 V
      J43-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

    3. Reconnect the J43 air conditioning amplifier assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      J43-5 (FDEF) - J43-4 (GND) W - W-B Wiper Deicer signal Engine switch on (IG), Front wiper deicer switch off 11 to 14 V
      J43-5 (FDEF) - J43-4 (GND) W - W-B Wiper Deicer signal Engine switch on (IG), Front wiper deicer switch on Below 2.2 V