HEATED WINDSHIELD DEFROSTER SYSTEM TERMINALS OF ECU


  1. CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

    B005N93C21
    *A w/o Seat Heater *B w/ Seat Heater

    1. Disconnect the J43 air conditioning amplifier assembly connector.

    2. Measure the voltage and resistance according to the value(s) in the table below.

      Tech Tips

      Measure the values on the wire harness side with the connector disconnected.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      J43-2 (IG+) - J43-4 (GND) GR - W-B Power source (IG) Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      J43-1 (B) - J43-4 (GND) R - W-B Battery power supply Always 11 to 14 V
      J43-4 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω

    3. Reconnect the J43 air conditioning amplifier assembly connector.

    4. Measure the voltage according to the value(s) in the table below.

      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      J43-17 (FDEF) - J43-4 (GND) W - W-B window Deicer signal Engine switch on (IG), Front window deicer switch off 11 to 14 V
      Engine switch on (IG), Front window deicer switch on Below 2.2 V