ROOF HEADLINING(w/o Rear No. 2 Seat) DISASSEMBLY

PROCEDURE


  1. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

    Click here

  2. REMOVE WASHER HOSE ASSEMBLY


    1. Remove the washer hose assembly.

      B005LZZC01
      *A for Standard Roof *B for Sliding Roof
      *C for Panoramic Moon Roof - -

  3. REMOVE VANITY LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for the RH side and LH side.


    1. B005NW1C02
      *1 Bulb Holder
      *a Claw (A)
      *b Claw (B)

      Disengage the 2 claws (A) and separate the bulb holder from the vanity light assembly as shown in the illustration.

    2. Disengage the claw (B) to remove the vanity light assembly.

  4. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here

  5. REMOVE NO. 1 ROOF WIRE


    1. Remove the adhesive tape from the roof headlining assembly.

      B005QEKC01
      *A for Standard Roof *B for Sliding Roof
      *C for Panoramic Moon Roof - -
      B005M97 Adhesive Tape - -

    2. Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

      B005O0NC01
      *A for Standard Roof *B for Sliding Roof
      *C for Panoramic Moon Roof - -
      *a 90° - -
      B005OOA Rotation Direction - -

    3. Disengage each clamp and remove the No. 1 roof wire from the roof headlining assembly.

  6. REMOVE NO. 1 ROOF SILENCER PAD


    1. Remove the 2 No. 1 roof silencer pads.

      B005QAQ

  7. REMOVE NO. 2 ROOF SILENCER PAD


    1. Remove the 2 No. 2 roof silencer pads.

      B005OZ6