INSTRUMENT PANEL SAFETY PAD INSTALLATION

PROCEDURE


  1. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Engage the 4 guides to temporarily install the instrument panel safety pad sub-assembly as shown in the illustration.

      B005MX1C01
      B005OOA Install in this Direction - -

      Note


      • Do not damage the instrument panel safety pad sub-assembly.

      • Do not allow the wire harnesses to interfere with the surrounding parts.

    2. Install the instrument panel safety pad sub-assembly with the 7 bolts <C>, 2 bolts <A> and nut <G>.

      B005QEQC01
      *a Bolt <A> *b Bolt <C>
      *c Clip *d Nut <G>
      Torque:
      Bolt<A>
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

    3. Install the 2 clips.

    4. Engage each clamp.

      B005LGZC01
      *A w/ Telematics Transceiver *B w/ Telematics Transceiver except G-BOOK

    5. Connect each connector.

  2. CONNECT NO. 2 INSTRUMENT PANEL WIRE

    Click here

  3. INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. B005NXQC01
      B005OOA Install in this Direction

      Engage the guide to install the front No. 2 console box insert as shown in the illustration.

    2. Install the 4 screws <E>.

    3. Install the clip.

  4. INSTALL FRONT NO. 1 CONSOLE BOX INSERT


    1. B005L6EC01
      B005OOA Install in this Direction

      Engage the 3 guides to install the front No. 1 console box insert as shown in the illustration.

    2. Install the 2 screws <E>.

    3. Install the clip.

  5. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING


    1. w/ Interior Illumination:


      1. Connect the connector.

    2. B005PCOC01
      B005OOA Install in this Direction

      Engage the 6 clips to install the No. 2 instrument cluster moulding as shown in the illustration.

  6. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. B005NVFC01
      B005OOA Install in this Direction

      Engage the 4 clips to install the No. 1 instrument panel register assembly as shown in the illustration.

  7. INSTALL FRONT PILLAR GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  8. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  9. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. B005PH8C02
      B005OOA Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. B005OIEC02
      B005OOA Install in this Direction

      Engage the 2 clips to install the No. 2 instrument panel speaker panel sub-assembly as shown in the illustration.

  10. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

    Click here

  11. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. B005PPVC01
      B005OOA Install in this Direction

      Engage the 4 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.

  12. INSTALL FRONT PILLAR GARNISH LH

    Click here

  13. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)

    Click here

  14. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY


    1. B005MODC02
      B005OOA Install in this Direction

      Engage the 2 guides as shown in the illustration.

    2. B005PGNC02
      B005OOA Install in this Direction

      Engage the 2 clips to install the No. 1 instrument panel speaker panel sub-assembly as shown in the illustration.

  15. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    1. Engage the clamp.

    2. Connect the connector.

    3. B005OROC01
      B005OOA Install in this Direction

      Engage the 6 claws as shown in the illustration.

    4. Install the 2 bolts <B> or <C>.

    5. Open the glove compartment door assembly.

    6. Install the glove compartment door assembly with the 3 screws <E>.

    7. Close the glove compartment door assembly.

  16. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connector.

    2. B005MU8C02
      B005OOA Install in this Direction

      Engage the 2 guides as shown in the illustration.

    3. B005PPCC02
      B005OOA Install in this Direction

      Engage the 2 claws as shown in the illustration.

    4. Install the No. 2 instrument panel under cover sub-assembly with the 2 screws <D>.

  17. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  18. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

  19. INSTALL INSTRUMENT PANEL GARNISH RH


    1. w/ Airbag Cut Off Switch:


      1. Connect the connector.

    2. B005PYYC01
      B005OOA Install in this Direction

      Engage the 8 clips to install the instrument panel garnish RH as shown in the illustration.

  20. INSTALL MULTI-DISPLAY ASSEMBLY (for 8 Inch Display)

    Click here

  21. INSTALL ACCESSORY METER ASSEMBLY (for 12.3 Inch Display)

    Click here

  22. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for 8 Inch Display)


    1. B005M1IC02
      B005OOA Install in this Direction

      Engage the 4 guides, 7 clips and claw to install the instrument panel finish panel sub-assembly as shown in the illustration.

  23. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 8 Inch Display)


    1. B005O45C01
      B005OOA Install in this Direction

      Engage the 5 guides as shown in the illustration.

    2. B005NZ2C01
      B005OOA Install in this Direction

      Engage the guide, 2 claws and 3 clips to install the center instrument cluster finish panel sub-assembly as shown in the illustration.

  24. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for 12.3 Inch Display)


    1. B005M9RC01
      B005OOA Install in this Direction

      Engage the 7 guides, 6 clips and 5 claws to install the instrument panel finish panel sub-assembly as shown in the illustration.

  25. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 12.3 Inch Display)


    1. B005M7WC01
      B005OOA Install in this Direction

      Engage the 5 guides as shown in the illustration.

    2. B005NSWC01
      B005OOA Install in this Direction

      Engage the 3 clips to install the center instrument panel finish panel sub-assembly as shown in the illustration.

  26. INSTALL CONSOLE BOX ASSEMBLY


    1. Connect each connector.

    2. B005MB3C01
      B005OOA Install in this Direction

      Engage the 5 clips to install the console box assembly as shown in the illustration.

  27. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

    Click here

  28. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER

    Click here

  29. INSTALL COMBINATION METER ASSEMBLY

    Click here

  30. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect the connector.

    2. B005LQ3C01
      B005OOA Install in this Direction

      Engage the 7 clips to install the instrument cluster finish panel sub-assembly as shown in the illustration.

  31. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  32. INSTALL LOWER INSTRUMENT FINISH PANEL SUB


    1. Connect the connector.

    2. B005QFZC01
      B005OOA Install in this Direction

      Engage the 4 guides and 9 clips to install the lower instrument finish panel sub as shown in the illustration.

  33. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. for LHD:


      1. B005ORSC01
        B005OOA Install in this Direction

        Engage the 11 clips and 3 claws to install the lower instrument panel finish panel sub-assembly as shown in the illustration.

      2. Install the 2 screws <D>.

      3. B005M4L

        Engage the 2 claws to connect the instrument panel hole cover.

    3. for RHD:


      1. B005LHVC02
        B005OOA Install in this Direction

        Engage the 12 clips and 3 claws to install the lower instrument panel finish panel sub-assembly as shown in the illustration.

  34. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  35. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage the 2 claws to connect the DLC3 connector.

    2. Engage the clamp.

    3. Connect the connector.

    4. for LHD:


      1. B005PX4C01
        B005OOA Install in this Direction

        Engage the 2 guides as shown in the illustration.

      2. B005OL9C01
        B005OOA Install in this Direction

        Engage the 3 claws as shown in the illustration.

    5. for RHD:


      1. B005MD7C02
        B005OOA Install in this Direction

        Engage the guide as shown in the illustration.

      2. B005OU4C02
        B005OOA Install in this Direction

        Engage the 3 claws as shown in the illustration.

    6. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <D>.

  36. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  37. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  38. INSTALL INSTRUMENT PANEL GARNISH LH


    1. B005LK3C01
      B005OOA Install in this Direction

      Engage the 8 clips to install the instrument panel garnish LH as shown in the illustration.

  39. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  40. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

    Click here