AIR CONDITIONING PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR CONDITIONER PRESSURE SENSOR


    1. Remove the vinyl tape from the air conditioner tube and accessory assembly.

    2. Sufficiently apply compressor oil to a new air conditioner pressure sensor.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent
    3. B005LEBC01
      *A for 8AR-FTS
      *B for 2GR-FKS
      *a Turn
      *b Hold

      Using a 27 mm deep socket wrench, install the air conditioner pressure sensor as shown in the illustration.

      Torque:
      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

    4. Connect the connector.

  2. INSTALL COOL AIR INTAKE DUCT SEAL (for 8AR-FTS)

    Click here

  3. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  4. WARM UP ENGINE

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  5. INSPECT FOR REFRIGERANT LEAK

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here