FRONT EVAPORATOR TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 COOLER THERMISTOR


    1. except 8AR-FTS:


      1. A01RDY9C01
        *a Fixed Part
        *b Sensor Part

        Install the No. 1 cooler thermistor as shown in the illustration.

        Installation Position
        Part Length
        A 61.1 mm (2.41 in.)
        B 50.0 mm (1.97 in.)

        Note


        • Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.

        • When reusing the No. 1 cooler evaporator sub-assembly, insert the No. 1 cooler thermistor one row next to the one that has been used previously (X in the illustration).

        • After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.

        • Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".

    2. for 8AR-FTS:


      1. A01RBYOC02
        *a Fixed Part
        *b Sensor Part

        Install the No. 1 cooler thermistor as shown in the illustration.

        Installation Position
        Part Length
        A 50.0 mm (1.97 in.)
        B 25.0 mm (0.984 in.)
        C 54.4 mm (2.14 in.)
        D 61.1 mm (2.41 in.)

        Note


        • Be sure to insert the No. 1 cooler thermistor only once because reinserting it into the same position will not allow it to be firmly secured.

        • When reusing the No. 1 cooler evaporator sub-assembly, insert the No. 1 cooler thermistor one row next to the one that has been used previously (X in the illustration).

        • After inserting the No. 1 cooler thermistor, do not apply excessive force to the wire.

        • Directly insert the No. 1 cooler thermistor until the edge of the plastic case "a" comes into contact with the No. 1 cooler evaporator sub-assembly "b".

  2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

    Click here

  3. INSTALL COOLER EXPANSION VALVE

    Click here

  4. INSTALL COOLING UNIT PARTS

    Click here

  5. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

    Click here

  6. INSTALL HEATER GROMMET (for LHD)

    Click here

  7. INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CONDITIONING HARNESS ASSEMBLY

    Click here

  9. INSTALL BLOWER ASSEMBLY

    Click here