CONDENSER(for 2GR-FKS) INSTALLATION

PROCEDURE


  1. INSTALL COOLER CONDENSER ASSEMBLY


    1. B005NRRC01
      B005OOA Install in this Direction

      Engage the 2 guides as shown in the illustration.

      Note

      Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.

    2. Engage the 4 claws to install the cooler condenser assembly.

      Tech Tips

      If a new cooler condenser assembly is installed, add compressor oil to the cooler condenser assembly as follows.

      Capacity
      Add 40 cc (1.35 fl. oz)
      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

  2. CONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY


    1. Remove the vinyl tape from the air conditioner tube and accessory assembly and the connecting part of the cooler condenser assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the air conditioner tube and accessory assembly.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the air conditioner tube and accessory assembly.

    4. Install the air conditioner tube and accessory assembly to the cooler condenser assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. CONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. Remove the vinyl tape from the discharge hose sub-assembly and the connecting part of the cooler condenser assembly.

    2. Sufficiently apply compressor oil to a new O-ring and the fitting surface of the discharge hose sub-assembly.

      Refrigerant Compressor Oil
      HFC-134a (R134a) ND-OIL 8 or equivalent
      HFO-1234yf (R1234yf) ND-OIL 12 or equivalent

    3. Install the O-ring to the discharge hose sub-assembly.

    4. Install the discharge hose sub-assembly to the cooler condenser assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  4. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    Click here

  5. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

  6. INSTALL HOOD LOCK ASSEMBLY

    Click here

  7. INSTALL HOOD LOCK RELEASE LEVER PROTECTOR

    Click here

  8. INSTALL HOOD LOCK CONTROL CABLE COVER

    Click here

  9. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  10. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  11. WARM UP ENGINE

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  12. INSPECT FOR REFRIGERANT LEAK

    for HFC-134a (R134a):

    Click here

    for HFO-1234yf (R1234yf):

    Click here

  13. ADJUST HOOD SUB-ASSEMBLY

    Click here