BLOWER MOTOR CONTROLLER REMOVAL

PROCEDURE

1. REMOVE REAR NO. 2 SEAT ASSEMBLY

   Click here

2. REMOVE REAR FLOOR FINISH PLATE

   Click here

3. REMOVE REAR DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

4. REMOVE REAR DOOR INSIDE SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. REMOVE REAR SEAT OUTER TRACK BRACKET COVER RH

   Click here

6. REMOVE FRONT DECK SIDE TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. REMOVE REAR SEAT SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

9. REMOVE ROPE HOOK ASSEMBLY

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

11. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

12. REMOVE BLOWER MOTOR CONTROL

    
    

    1. 

       Disconnect the connector.

    2. Remove the 2 screws and blower motor control.