AIR CONDITIONING FILTER REMOVAL

PROCEDURE


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    1. A01RE98C02
      *1 Glove Compartment Door Stopper Sub-assembly
      *a Stopper

      Disengage the claw to disconnect the glove compartment door stopper sub-assembly.

    2. Slightly bend stoppers (A) and (B) in the directions indicated by the arrows shown in the illustration and open the glove compartment door assembly until the stoppers are released.

    3. A01REBEC02
      *a 52.5°
      B005OOA Remove in this Direction

      Open the glove compartment door assembly to approximately 52.5° from its closed position. Pull it horizontally in the direction indicated by the arrow shown in the illustration to disengage the 2 hinges and remove the glove compartment door assembly.

      Note

      Pulling the glove compartment door assembly upward when removing it will cause the hinges to deform. Be sure to pull out the glove compartment door assembly horizontally.

  2. REMOVE INSTRUMENT LOWER COVER


    1. A01RDPMC02
      B005OOA Remove in this Direction

      Disengage the 2 claws and 3 guides to remove the instrument lower cover as shown in the illustration.

  3. REMOVE AIR FILTER COVER PLATE


    1. A01REOXC02
      B005OOA Remove in this Direction (1)
      B005OMH Remove in this Direction (2)

      Disengage the claw and 2 guides as indicated by the arrows, in the order shown in the illustration to remove the air filter cover plate.

  4. REMOVE CLEAN AIR FILTER


    1. A01R9UNC02
      B005OOA Remove in this Direction

      Remove the air filter sub-assembly as shown in the illustration.

    2. A01VV21

      Disengage the 4 guides to remove the clean air filter from the air filter case.