BLOWER UNIT REASSEMBLY

PROCEDURE


  1. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY


    1. A01RAS9C01
      *a Link

      Connect the 2 links of the blower assembly to the 2 plates of the No. 1 blower damper servo sub-assembly as shown in the illustration.

    2. Install the No. 1 blower damper servo sub-assembly with the 2 screws.

  2. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. A01RD8K

      Install the blower motor with fan sub-assembly with the 3 screws.

      Note

      Replace the blower motor with fan sub-assembly if it has been dropped or subjected to a severe impact.