REAR CENTER SEAT OUTER BELT ASSEMBLY(w/o Rear No. 2 Seat) INSTALLATION

PROCEDURE

1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

   

   
   

   1. Install the rear center seat outer belt assembly with the 2 nuts.

      Torque:

      Nut (A)

      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

      Nut (B)

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

   Click here

3. INSTALL REAR SEAT SHOULDER BELT COVER

   Click here

4. INSTALL SEAT BELT ANCHOR COVER CAP

   Click here

5. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH

   Click here

6. INSTALL REAR SEATBACK COVER RH

   Click here

7. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

   

   *a	Protruding Part

   
   

   1. Connect the anchor of the rear center seat outer belt assembly with the bolt.

      Torque:

      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat outer belt assembly to overlap the protruding part of the seatback frame.

8. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

   Click here

9. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

   Click here

10. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH (for Manual Seat)

    Click here

11. INSTALL REAR SEAT COVER CAP RH (for Manual Seat)

    Click here

12. INSTALL POWER SEAT SWITCH ASSEMBLY (for Power Seat)

    Click here

13. INSTALL REAR SEAT ASSEMBLY RH

    Click here