REAR CENTER SEAT OUTER BELT ASSEMBLY(w/ Rear No. 2 Seat) INSTALLATION

PROCEDURE


  1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. B005O7EE02

      Engage the 2 guides and temporarily install the rear center seat outer belt assembly with the 2 nuts.

    2. Fully tighten the nut (A) and then the nut (B) to install rear center seat outer belt assembly.

      Torque:
      Nut (A)
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
      Nut (B)
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL REAR SEATBACK EDGE PROTECTOR

    Click here

  3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD

    Click here

  4. INSTALL REAR SEAT SHOULDER BELT COVER

    Click here

  5. INSTALL SEAT BELT ANCHOR COVER CAP

    Click here

  6. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH

    Click here

  7. INSTALL REAR SEAT UPPER RECLINING COVER RH

    Click here

  8. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH

    Click here

  9. INSTALL REAR SEATBACK COVER RH

    Click here

  10. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. B005LZLC02
      B005M97 Protruding Part

      Connect the anchor of the rear center seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat outer belt assembly to overlap the protruding parts of the rear seatback frame sub-assembly.

  11. INSTALL REAR NO. 1 SEAT RECLINING ADJUSTER INSIDE COVER

    Click here

  12. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click here

  13. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH

    Click here

  14. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

  15. INSTALL REAR SEAT COVER CAP RH

    Click here

  16. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here