REAR CENTER SEAT INNER BELT ASSEMBLY(w/o Rear No. 2 Seat) INSPECTION

PROCEDURE


  1. INSPECT REAR CENTER SEAT INNER BELT ASSEMBLY


    1. A01R92BC01
      *a

      Component without harness connected

      (Rear Center Seat Inner Belt Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Rear center seat belt unfastened Below 1 Ω
      Rear center seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear center seat inner belt assembly.