TELEMATICS TRANSCEIVER REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during telematics transceiver removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Replacement of telematics transceiver Vehicle contract setting

  • G-BOOK service

  • Emergency call service

Click here

PROCEDURE


  1. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  2. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    Click here

  3. REMOVE TELEMATICS TRANSCEIVER WITH BRACKET


    1. B005NE8

      Disconnect each connector.

    2. Remove the 2 nuts and telematics transceiver with bracket.

  4. REMOVE NO. 3 TELEPHONE BRACKET


    1. B005MM1

      Remove the screw and No. 3 telephone bracket.

  5. REMOVE NO. 4 TELEPHONE BRACKET


    1. B005QDP

      Remove the screw and No. 4 telephone bracket.

  6. REMOVE TELEMATICS TRANSCEIVER