REMOTE TOUCH DISASSEMBLY

CAUTION / NOTICE / HINT

Note

When disassembling the remote touch assembly, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

PROCEDURE


  1. REMOVE REMOTE OPERATION BOARD (for Radio and Display Type with 8 Inch Display)


    1. A01RANG

      Remove the 4 screws.

    2. Disengage the 2 guides and remove the remote operation board from the upper rear console panel.

  2. REMOVE SWITCH KNOB (except Radio and Display Type with 8 Inch Display)


    1. A01RECSC01
      B005OOA Remove in this Direction

      Remove the switch knob as shown in the illustration.

  3. REMOVE REMOTE OPERATION BOARD (except Radio and Display Type with 8 Inch Display)


    1. A01R98W

      Remove the 4 screws.

    2. A01R9W7

      Disconnect the connector to remove the remote operation board from the remote operation switch.

    3. A01RF0P

      Disengage the 6 clamps.

    4. Disconnect the connector to remove the switch wire from the remote operation board.