NAVIGATION RECEIVER INSTALLATION

PROCEDURE

1. PRECAUTION (w/ Telematics Transceiver)

   Note

   When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL RADIO RECEIVER ASSEMBLY

3. INSTALL HARD DISK DRIVE (w/ Telematics Transceiver)

   Click here

4. INSTALL NO. 2 RADIO BRACKET (for LHD)

   
   

   1. Install the No. 2 radio bracket with the 3 screws.

   2. w/ Rear Seat Belt Warning:

      
      

      1. Engage the 2 clamps.

5. INSTALL NO. 2 RADIO BRACKET (for RHD)

   
   

   1. Install the No. 2 radio bracket with the 3 screws.

6. INSTALL NO. 1 RADIO BRACKET (for LHD)

   
   

   1. Install the No. 1 radio bracket with the 3 screws.

7. INSTALL NO. 1 RADIO BRACKET (for RHD)

   
   

   1. Install the No. 1 radio bracket with the 3 screws.

   2. w/ Rear Seat Belt Warning:

      
      

      1. Engage the 2 clamps.

8. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

9. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Tech Tips

   Use the same procedure for the No. 3 instrument panel register assembly.

10. INSTALL CLOCK ASSEMBLY

    Click here

11. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER

    Click here

12. INSTALL LOWER INSTRUMENT FINISH PANEL SUB

    Click here

13. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT

    Click here

14. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

15. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

17. PERFORM INITIALIZATION

    w/ Parallel Parking Assist Function:

    Tech Tips

    When replacing the radio receiver assembly, perform Parking assist monitor system initialization.

    for Initialization: Click here

    for Calibration: Click here

18. PERFORM INITIALIZATION

    w/ G-BOOK:

    Tech Tips

    When replacing the radio receiver assembly, perform telematics system initialization.

    
    

    • w/ Telematics Transceiver:

      for Initialization: Click here

      for Registration: Click here

    • w/o Telematics Transceiver:

      for Initialization: Click here

      for Registration: Click here