AMPLIFIER ANTENNA(w/ Rear No. 2 Seat) INSTALLATION

PROCEDURE

INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY
1. Engage the 2 guides.
2. *A for Type A
  
  *B for Type B
  
  Install the No. 1 amplifier antenna assembly with the bolt.
  
  Torque:
  
  for Type A
  
  7.0 N*m { 71 kgf*cm, 62 in.*lbf }
  
  for Type B
  
  10 N*m { 102 kgf*cm, 7 ft.*lbf }
  
  Note
  
  There are two types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.
3. Connect 2 connectors.
INSTALL BACK DOOR TRIM PANEL ASSEMBLY

Click here
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

Click here
INSTALL DOOR PULL HANDLE

Click here
INSTALL BACK DOOR TRIM BASE

Click here
INSTALL BACK DOOR LOCK COVER

Click here
INSTALL BACK DOOR TRIM COVER LH

Click here
INSTALL BACK DOOR TRIM COVER RH

Tech Tips

Use the same procedure as for the LH side.
INSTALL BACK WINDOW UPPER PANEL TRIM

Click here

*A	for Type A
*B	for Type B