QUARTER TRIM SPEAKER(w/o Rear No. 2 Seat) INSPECTION

PROCEDURE


  1. INSPECT QUARTER SIDE SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. B005NMYC23
      *a

      Component without harness connected

      (Quarter Side Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 7.0 to 10.6 Ω

      If the result is not as specified, replace the speaker.