QUARTER TRIM SPEAKER(w/ Rear No. 2 Seat) INSPECTION

PROCEDURE


  1. INSPECT QUARTER SIDE SPEAKER ASSEMBLY


    1. With the speaker installed, check that there is no looseness or other abnormalities.

    2. Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.

    3. B005NMYC23
      *a

      Component without harness connected

      (Quarter Side Speaker Assembly)

      Measure the resistance of the speaker.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always 7.0 to 10.6 Ω

      If the result is not as specified, replace the speaker.

    4. When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.

      Tech Tips

      Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker.