AUDIO AND VISUAL SYSTEM(for 12.3 Inch Display) No Feedback Force Provided by Knob of Remote Touch

DESCRIPTION

The remote touch has 2 built-in motors that are operated to provide feedback force via the remote touch switch knob according to the pointer display position on the accessory meter assembly.

PROCEDURE

1. REMOTE TOUCH SELF CHECK (REMOTE TOUCH SWITCH KNOB FEEDBACK FORCE GENERATION CHECK)

   
   
   1. 

      *a	Switch Knob
      *b	Control Direction
      *c	Feedback Force

      Check the remote touch switch knob feedback force generated.

      
      

      1. Move the remote touch switch knob laterally and longitudinally to check that feedback force is generated.

         OK
         Feedback force is generated.

         Tech Tips

         When the engine switch is turned on (ACC), feedback force is generated. When the engine switch is turned off, feedback force is not generated, and the remote touch switch knob will move freely.

      Result
      Proceed to OK NG

   
   

   NG

   REPLACE REMOTE OPERATION BOARD Click here

   OK

2. REMOTE TOUCH SELF CHECK (FEEDBACK FORCE FUNCTION)

   
   

   1. Check feedback force function

      
      

      1. Move the pointer on the screen by operating the remote touch switch knob and check that the feedback force of the knob changes according to the screen being displayed and the pointer position.

         Tech Tips

         Refer to Remote Touch Outline for further information on remote touch switch knob feedback force generated according to the screen being displayed and the pointer position.

         Click here

         Result
         Result Proceed to Feedback force of the remote touch switch knob does not change according to the screen being displayed and the pointer position. A Feedback force of the remote touch switch knob changes according to the screen being displayed and the pointer position. B

   
   

   A

   REPLACE RADIO RECEIVER ASSEMBLY Click here

   B

   USE SIMULATION METHOD TO CHECK Click here