VACUUM WARNING SWITCH INSTALLATION

PROCEDURE


  1. INSTALL CHECK VALVE GROMMET


    1. Install a new check valve grommet to the brake booster assembly.

  2. INSTALL VACUUM WARNING SWITCH ASSEMBLY (for LHD)


    1. A01VXLJC01
      *a 30° +/- 20°
      B005LWS Up

      Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

    2. Connect the connector to the vacuum warning switch assembly.

  3. INSTALL VACUUM WARNING SWITCH ASSEMBLY (for RHD)


    1. A01VUZUC01
      *a 30° +/- 20°
      B005LWS Up

      Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

    2. Connect the connector to the vacuum warning switch assembly.

  4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

    for LHD: Click here

    for RHD: Click here

  5. INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY

    Click here