TIRE PRESSURE WARNING RECEIVER(for Roof) INSTALLATION

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

    Note


    • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

    • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.


    1. B005P6Y

      Connect the connector to the tire pressure warning ECU and receiver.

    2. Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL ROOF HEADLINING ASSEMBLY

    Click here

  3. REGISTER TRANSMITTER ID

    Click here

  4. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  5. PERFORM INITIALIZATION

    Click here