TIRE PRESSURE WARNING ANTENNA INSTALLATION

PROCEDURE

INSTALL FRONT TIRE PRESSURE ANTENNA
Note
- Do not drop, strike or otherwise subject the front tire pressure antenna to impact.
- If the front tire pressure antenna is subjected to an impact, replace it with a new one.
1. *A for Type A
  
  *B for Type B
  
  Connect the connector.
2. Engage the guide and install the front tire pressure antenna with the bolt.
  
  Torque:
  
  for Type A
  
  5.0 N*m { 51 kgf*cm, 44 in.*lbf }
  
  for Type B
  
  10 N*m { 102 kgf*cm, 7 ft.*lbf }
  
  Note
  
  There are 3 types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.
INSTALL HEADLIGHT ASSEMBLY LH

for Triple Beam Headlight: Click here

for Single Beam Headlight: Click here
INSPECT TIRE PRESSURE WARNING SYSTEM

Click here

*A	for Type A
*B	for Type B