4WD CONTROL SWITCH(for 8AR-FTS) INSTALLATION

PROCEDURE

1. INSTALL AWD LOCK SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)

   
   

   1. Engage the 4 claws to install the AWD lock switch (integration control and panel assembly) to the lower instrument panel finish panel sub-assembly.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

4. INSTALL INSTRUMENT PANEL GARNISH LH

   Click here

5. INSTALL COWL SIDE TRIM BOARD LH

   Click here

6. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here