DYNAMIC TORQUE CONTROL AWD SYSTEM DTC CHECK / CLEAR

CHECK DTC (When Using GTS)

1. Check for DTCs.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Read the DTCs following the prompts on the GTS screen. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.

      
      Chassis > Four Wheel Drive > Trouble Codes

   5. Check the details of the DTCs.

      Click here

CLEAR DTC (When Using GTS)

1. Clear the DTCs.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Chassis / Four Wheel Drive / Trouble Codes.

   5. Clear the DTCs.

      
      Chassis > Four Wheel Drive > Clear DTCs

CHECK DTC (When Using SST Check Wire)

1. 

   *a	Front view of DLC3

   Check for DTCs.

   
   

   1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST

      09843-18040

   2. Turn the engine switch on (IG).

   3. Read the output of the multi-information display.

      Tech Tips

      
      

      • During diagnosis, "DIAG AWD" is displayed on the multi-information display.

      • If the dynamic torque control AWD system is normal, "DIAG AWD FF" is displayed on the multi-information display.

      • If a malfunction in the dynamic torque control AWD system is detected, "DIAG AWD XX (DTC)" is displayed on the multi-information display.

      • DTCs are explained in "DIAGNOSTIC TROUBLE CODE CHART".

        Click here

      • If the normal system code ("DIAG AWD FF") or stored DTCs are not displayed on the multi-information display, perform the following troubleshooting procedures.

        Section Title	See Procedure
        AWD Warning Light does not illuminate	Click here
        TC and CG Terminal Circuit	Click here

CLEAR DTC (When Using SST Check Wire)