OIL PUMP REASSEMBLY

PROCEDURE


  1. INSTALL FRONT OIL PUMP OIL SEAL


    1. A01RCXSC01
      *a Depth

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      SST
      09350-32014   ( 09351-32140 )
      Standard Depth
      -0.2 to 0.2 mm (-0.00787 to 0.00787 in.)

    2. Coat the lip of the front oil pump oil seal with MP grease.

  2. INSTALL FRONT OIL PUMP BODY O-RING


    1. A01RAJ2

      Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.

      Note

      Ensure that the front oil pump body O-ring is not twisted.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR


    1. A01RCDFC01
      *a Mark

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR


    1. A01RFTTC01
      *a Mark

      Coat the front oil pump drive gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.

  5. INSTALL STATOR SHAFT ASSEMBLY


    1. A01RC52

      Using a T30 "TORX" socket wrench, install the stator shaft assembly to the front oil pump body and gear sub-assembly with the 10 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  6. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. A01RDWM

      Using a T30 "TORX" socket wrench, install a new valve body oil strainer assembly to the stator shaft assembly with the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. INSTALL CLUTCH DRUM OIL SEAL RING


    1. A01RBHA

      Coat 4 new clutch drum oil seal rings with ATF and install them to the stator shaft assembly.

  8. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here