SHIFT PADDLE SWITCH INSPECTION

PROCEDURE


  1. INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)


    1. Shift Paddle Switch (Transmission Shift Switch Assembly) LH:


      1. A01VUEBC11
        *a

        Component without harness connected

        (Shift Paddle Switch (Transmission Shift Switch Assembly) LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 (ECC) - 1 (SDN) "-" continuously pulled Below 2.5 Ω
        Released 1 MΩ or higher

        If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) LH.

    2. Shift Paddle Switch (Transmission Shift Switch Assembly) RH:


      1. A01VTKBC09
        *a

        Component without harness connected

        (Shift Paddle Switch (Transmission Shift Switch Assembly) RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        3 (SUP) - 2 (ECC) "+" continuously pulled Below 2.5 Ω
        Released 1 MΩ or higher

        If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) RH.