SPEED SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT)

   
   

   1. Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

2. INSTALL TRANSMISSION REVOLUTION SENSOR (NC3)

   
   

   1. Using a T30 "TORX" socket wrench, install the transmission revolution sensor (NC3) to the automatic transaxle case sub-assembly with the bolt.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   2. Connect the transmission revolution sensor (NC3) connector.

3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here