SHIFT LEVER REMOVAL

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

      B005NUY

  2. REMOVE SHIFT LOCK RELEASE BUTTON COVER


    1. B005MNJC01
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the shift lock release button cover from the shift position indicator.

      Note

      Be careful not to damage the shift lock release button cover and shift position indicator.

  3. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  4. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    Click here

  5. DISCONNECT WIRE HARNESS


    1. B005Q39

      Disconnect the transmission control switch connector.

    2. B005PZX

      Disconnect the shift lock control ECU connector.

    3. B005LY2

      Disengage the 3 clamps and disconnect the wire harness from the transmission floor shift assembly.

  6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. B005NLV

      Disconnect the transmission control cable assembly from the transmission floor shift assembly.

    2. B005OP7

      Disengage the 2 claws and disconnect the transmission control cable assembly from the transmission floor shift assembly.

  7. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

    B005O5U

    1. Remove the 4 bolts and transmission floor shift assembly from the vehicle body.