PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

      B005NUY

  2. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. REMOVE AIR CLEANER BRACKET

    Click here

  6. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  7. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01VVQ1

      Disconnect the park/neutral position switch assembly connector.

    2. A01VW2O

      Remove the nut, washer and transmission control shaft lever from the park/neutral position switch assembly.

    3. A01VY1S

      Loosen the 2 bolts of the park/neutral position switch assembly.

    4. A01VWL6C01
      *a Protrusion

      Align the protrusions of the park/neutral position switch assembly as shown in the illustration.

    5. Hold the park/neutral position switch assembly in position and tighten the 2 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note

      After installing the park/neutral position switch assembly, confirm that the protrusions on the park/neutral position switch assembly are aligned.

    6. Install the transmission control shaft lever to the manual valve lever shaft sub-assembly with the washer and nut.

      Torque:
      12.7 N*m  { 130 kgf*cm, 9 ft.*lbf }

    7. Connect the park/neutral position switch assembly connector.

  8. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  9. INSTALL AIR CLEANER BRACKET

    Click here

  10. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  11. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  12. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  13. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

    Click here