VALVE BODY ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT SOLENOID (SL) VALVE


    1. A01RDHJC02
      *a

      Component without harness connected

      (Solenoid (SL) Valve)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      Solenoid (SL) valve connector terminal - Solenoid (SL) valve body 20°C (68°F) 11 to 15 Ω

      If the result is not as specified, replace the solenoid (SL) valve.

    2. Connect a positive (+) lead from the battery to the terminal of the solenoid (SL) valve connector and a negative (-) lead to the solenoid (SL) valve body, and check the operation of the solenoid (SL) valve.

      Note

      When using battery voltage during the inspection, do not bring the positive (+) and negative (-) tester probes too close to each other as a short circuit may occur.

      OK
      The valve moves and makes an operating sound.

      If the result is not as specified, replace the solenoid (SL) valve.

  2. INSPECT SOLENOID (SLT) VALVE


    1. A01RFAWC04
      *a

      Component without harness connected

      (Solenoid (SLT) Valve)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 5.0 to 5.6 Ω

      If the result is not as specified, replace the solenoid (SLT) valve.

    2. Connect a positive (+) lead from the battery with a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid (SLT) valve connector, and check the operation of the solenoid (SLT) valve.

      Note

      When using battery voltage during the inspection, do not bring the positive (+) and negative (-) tester probes too close to each other as a short circuit may occur.

      OK
      The valve moves and makes an operating sound.

      If the result is not as specified, replace the solenoid (SLT) valve.

  3. INSPECT SOLENOID (SLU) VALVE

    Tech Tips

    Refer to Inspect Solenoid (SLT) valve.

  4. INSPECT SOLENOID (SL1) VALVE

    Tech Tips

    Refer to Inspect Solenoid (SLT) valve.

  5. INSPECT SOLENOID (SL2) VALVE

    Tech Tips

    Refer to Inspect Solenoid (SLT) valve.

  6. INSPECT SOLENOID (SL3) VALVE

    Tech Tips

    Refer to Inspect Solenoid (SLT) valve.

  7. INSPECT SOLENOID (SL4) VALVE

    Tech Tips

    Refer to Inspect Solenoid (SLT) valve.