SPEED SENSOR INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION REVOLUTION SENSOR

   
   

   1. Coat the 2 bolts with ATF.

   2. 

      ATF WS

      Temporarily install the transmission revolution sensor to the transmission valve body assembly with the 2 bolts.

      Note

      Do not use a transmission revolution sensor that has been dropped.

   3. Tighten the 2 bolts in the order shown in the illustration.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

   4. Connect the transmission revolution sensor connector.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

   Click here