COOLING FAN MOTOR INSTALLATION

PROCEDURE

1. INSTALL COOLING FAN MOTOR RH

   
   

   1. Cooling Fan Motor 100 W Type:

      
      

      1. Install the cooling fan motor RH with the 3 screws.

         Torque:

         2.6 N*m  { 27 kgf*cm, 23 in.*lbf }

      2. Engage the 3 clamps.

      3. Connect the cooling fan motor RH connector.

   2. Cooling Fan Motor 200 W Type:

      
      

      1. Install the cooling fan motor RH with the 3 screws.

         Torque:

         3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

      2. Engage the 2 clamps.

      3. Connect the cooling fan motor RH connector.

2. INSTALL COOLING FAN MOTOR LH

   
   

   1. Install the cooling fan motor LH with the 3 screws.

      Torque:

      3.9 N*m  { 40 kgf*cm, 35 in.*lbf }

   2. Engage the 3 clamps.

   3. Connect the cooling fan motor LH connector.

3. INSTALL FAN RH

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan RH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

4. INSTALL FAN LH

   Note

   Do not reverse the position of the fan and No. 2 fan when installing them. Doing so may damage the parts.

   
   

   1. Install the fan LH with the nut.

      Torque:

      6.3 N*m  { 64 kgf*cm, 56 in.*lbf }

5. INSTALL RADIATOR ASSEMBLY

   Click here