THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

   
   

   1. Install a new gasket to the water inlet with thermostat sub-assembly.

   2. Install the water inlet with thermostat sub-assembly with the 2 bolts and 2 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. CONNECT WATER BY-PASS HOSE

   
   

   1. Connect the water by-pass hose and slide the clip to secure it.

3. INSTALL FRONT NO. 1 ENGINE MOUNTING BRACKET LH

   Click here

4. CONNECT ENGINE WIRE

   
   

   1. Connect the water inlet with thermostat sub-assembly connector.

   2. Connect the engine wire with the bolt.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

5. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

   Click here